KDM Series

KDM Serisi

KDM series are non-self priming, horizontal, ring portions radially divided, multistage centrifugal pumps.
Impeller is between bearings; it is single-entry, closed impeller and dynamically balanced.
There is a balancing drum at discharge side to balance axial load.
The pump and motor is fixed on the same chassis and are connected via a flexible coupling to each other.
Suction and discharge press nozzles can be selected in different 90° positions.
Specially designed fans provide extra cooling to the bearings.
Bearings lubricated by the liquid.
Axial loads balanced with balancing drum and thus seal pressure is decreased. High efficiency has been achieved due to the low leakage flow.
There is a level indicator for oil level in the bearing housing.
There is thermometer to see the oil temperature while running.
Emergency measures for both oil and temperture levels.
Angular contact ball bearings are used. These bearings have a longer life even under extreme working hours.
Soft packing or mechanical seal is used for sealing.